Cisco RV130W Wireless-N Multifunction VPN Router
Description
0 % VAT Applicable
Integrity Guaranteed
Green: Best
Yellow: Unknown
Red: Poor
Original
Quality
Seller Reliability
Model: Cisco RV130W
Standards:
IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1D, 802.1p, 802.1w (Rapid Spanning Tree), 802.1X (security authentication), 802.1Q (VLAN), 802.11i (Wi-Fi Protected Access [WPA2] security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460), Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723)
Ports:
LAN, WAN, USB
Switch:
Power button (on/off)
Buttons:
Reset
Cabling Type:
Category 5e or better
LEDs:
Power, VPN, USB, WAN, Wireless, LAN (ports 1-4)
Operating System:
Linux
Network Protocols:
Dynamic Host Configuration Protocol (DHCP) server
Point-to-Point Protocol over Ethernet (PPPoE)
Point-to-Point Tunneling Protocol (PPTP)
Layer 2 Tunneling Protocol (L2TP)
DNS proxy
DHCP relay agent
IGMP proxy and multicast forwarding
Rapid Spanning Tree Protocol (RSTP)
Dynamic Domain Name System (TZO, DynDNS, 3322.org, NOIP)
Network Address Translation (NAT), Port Address Translation (PAT)
One-to-One NAT
Port management
Port mirroring
Software configurable DMZ to any LAN IP address
Session Initiation Protocol (SIP) Application Layer Gateways (ALG)
LAN:
Four (4) 10/100/1000 Mbps Gigabit LAN ports with managed switch
WAN:
Single (1) 10/100/1000 Mbps Gigabit WAN port
WLAN:
Built-in high-speed 802.11n wireless access point
Routing Protocols:
Static routing
Dynamic routing
RIP v1 and v2
Inter-VLAN routing
Network Address Translation (NAT):
Port Address Translation (PAT), Network Address Port Translation (NAPT) protocol
VLAN Support:
Port-based and 802.1Q tag-based VLANs
Number of VLANs:
5 active VLANs (3-4096 range)
IPv6:
Dual-stack IPv4 and IPv6
6to4 tunneling
Stateless address auto-configuration
DHCPv6 Server for IPv6 Clients on LAN
DHCP v6 client for WAN connectivity
Internet Control Message Protocol (ICMP) v6
Static IPv6 Routing
Dynamic IPv6 Routing with RIPng
Network Edge (DMZ):
Software configurable to any LAN IP address
Layer 2:
802.1Q-based VLANs, 5 active VLANs
Security:
Firewall: Stateful packet inspection (SPI) firewall, port forwarding and triggering, denial-of-service (DoS) prevention, software-based DMZ
DoS Attacks Prevented: SYN Flood Detect Rate, Echo Storm, ICMP Flood, UDP Flood, TCP Flood, Block Java, Cookies, Active-X, HTTP Proxy
Access Control: IP access control lists; MAC-based wireless access control
Content Filtering: Static URL blocking or keyword blocking, Web filtering: Content filtering that covers more than 27 billion URLs
Secure Management: HTTPS, username/password complexity
WPS: Wi-Fi Protected Setup
User Privileges: 2 levels of access: admin and guest
VPN:
Gateway-to-gateway IPsec VPN: 10 gateway-to-gateway IPSec tunnels
Client-to-gateway IPsec VPN: 10 client-to-gateway IPsec tunnels using TheGreenBow and ShrewSoft VPN client
PPTP VPN: 10 PPTP tunnels for remote client access
Encryption: Triple Data Encryption Standard (3DES)
Authentication: MD5/SHA1
VPN Pass-through: IPsec/PPTP/Layer 2 Tunneling Protocol (L2TP) pass-through
Quality of Service:
QoS: 802.1p port-based priority on LAN port, application-based priority on WAN port, 3 queues, Differentiated Services Code Point support (DSCP), Class of Service (CoS), Bandwidth Management for service prioritization
Jumbo Frame:
Supports Jumbo Frame on Gigabit ports - at least 1536B
Performance:
NAT Throughput: 800 Mbps
Concurrent Sessions: 12,000
IPsec VPN Throughput (3DES/AES): 50 Mbps
Configuration:
Web User Interface: Simple, browser-based configuration (HTTP/HTTPS)
Management:
Management Protocols: Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour, Universal Plug and Play (UPnP)
Event Logging: Local, Syslog, email alerts
Network Diagnostics: Ping, Traceroute, and DNS Lookup
Upgradability: Firmware upgradable through web browser, imported/exported configuration file
System